JUMO dTRANS T1000 – Temperature Sensor with IO-Link (902915)
- Small, compact, robust
- Stainless steel, fully welded
- Various process connections
- Hygienic process connections
- Simple startup
- Easy sensor replacement
- High degree of accuracy
- Connection via IO-Link master
- LED status display
- Also available as a pressure sensor with IO-Link
Korist za kupca
- Multi-vendor point-to-point connection
- Open standard with maximum transparency to the field level (IEC 61131-9)
- Inexpensive, pre-fabricated connecting cable (no wiring errors)
- Simple, uniform wiring and startup thanks to standardized interface
- Industry 4.0: pervasive communication from the control to the sensors
- Retrieval of process data and diagnostic information
- Dynamic change to the parameters
- More safety during sensor replacement
- Automatic parameterization possible
- Replacement with sensors of same type but with different properties can be detected
- Optimization of the production process due to communication down to the lowest field level
- Reduction of mounting and startup times
- Reduction of maintenance and service costs while plant availability increases at the same time
- Process automation
- Machines for the food and beverage industry
- General mechanical and apparatus engineering
The temperature sensor is used for temperature measurement and monitoring. The effect of the temperature on a RTD temperature probe generates a signal which is amplified, digitalized, and processed.
The temperature sensor is equipped with an IO-Link interface according to specification 1.1. IO-Link supports bidirectional communication and is used to exchange the process data, parameters, diagnostic information, and status messages. The two green LEDs are permanently lit as soon as power is supplied to the device. Once an IO-Link connection is established, the LEDs flash.
The switching behavior and the switching thresholds of the switching outputs (max. 2 pieces; "p" or "n" switching) can be individually configured – like many other parameters. Any IO-Link master can be used for the configuration.
As a result, the temperature sensor is suitable for use in plant and mechanical engineering for connecting to automation systems. The user has a number of process connections available.
|Broj artikla||Opis proizvoda||Price of the full version|